Choose Your Category

Complete the 3 Steps to Instantly see your quote.

Invision Studio Invision Studio

Commercial

Invision Studio Invision Studio
Invision Studio Invision Studio

Real Estate

Invision Studio Invision Studio

Choose Your Services

Select All Services that apply

Invision Studio 360 Tours Icon

360° Virtual Tours

Invision Studio Invision Studio

Edit

Invision Studio

X
Yes
No
Yes
No
Yes
No
Save
Invision Studio

Architectural Photos

Invision Studio Invision Studio

Edit

Invision Studio

X
Yes
No
Save
Invision Studio

Aerial Drone Photos

Invision Studio Invision Studio

Edit

Invision Studio

X
Yes
No
Save

Project Details

Fill in Required Fields to see your Quote.

From Invision Studio To Invision Studio

* Your information will remain private (See privacy policy for details)

Congratulations!

We've Emailed Your Quote and we'll be in touch.
We look forward to working with you on this exciting project!

Industry

Estimated Cost

Invision Studio Invision Studio
Invision Studio
Invision Studio

X
Yes
No
Yes
No
Yes
No
Invision Studio Invision Studio
Invision Studio
Invision Studio

X
Yes
No
Invision Studio Invision Studio
Invision Studio
Invision Studio

X
Yes
No
Next

X

Quick Takeaways:

  • Matterport 3D Tours create a verifiable, time-stamped record of site conditions at every milestone.
  • Reduce RFIs, rework, and disputes by capturing “as-built” reality before it’s covered up.
  • Remote access for owners, lenders, and subs speeds approvals and pay apps without extra site visits.
  • Integrates with BIM via MatterPak and point clouds for clash checks and accurate coordination.
  • Our Matterport 3D Tour photographers recommend a consistent scan cadence and clear annotation to turn each capture into actionable project intelligence.

Why Matterport 3D Tours Are a Construction Progress Superpower

New construction moves fast—and small misalignments become expensive quickly. Matterport 3D Tours provide a high-fidelity digital twin of your jobsite so everyone can see the same truth, from kickoff to closeout. With a secure, shareable link, the entire team can:

  • Walk the site remotely to verify installation details and percent-complete.
  • Document in-wall conditions (MEP rough-ins, firestopping, blocking) before drywall.
  • Reference exact measurements for decisions without waiting on a site visit.
  • Preserve an audit trail for lender inspections, insurance, and warranty claims.

Our Matterport 3D Tour photographers recommend thinking of each scan as a “checkpoint” in your quality plan—capturing what’s installed, where, and when, with the clarity of a 360 walk-through and the precision of LiDAR.

Where Matterport Fits in the Build Cycle

Matterport adds measurable value at each phase:

  • Pre-slab and foundation: Validate layout, sleeves, and embeds. Catch misplacements early.
  • Framing and structural: Record load-bearing elements, shear walls, and penetrations.
  • MEP rough-in: Document exact routing for plumbing, electrical, HVAC, and low-voltage for future maintenance and TI changes.
  • Pre-drywall: The most critical capture for as-built verification; our Matterport 3D Tour photographers recommend scanning just before insulation and again post-insulation.
  • Finishes and punch: Track unit-by-unit completion, tag deficiencies, and assign punch items.
  • Turnover and warranty: Create a final digital twin for owner onboarding and facility teams.

Bonus: For phased or multi-building projects, a scan cadence by area or level keeps reporting aligned with your schedule of values.

From Scan to Share: A Lean, Repeatable Workflow

Invision Studio delivers a streamlined capture-to-delivery process designed for busy job sites:

  1. Plan the scope: Floors, units, amenities, exterior paths. Our Matterport 3D Tour photographers recommend aligning scan zones with bid packages or CSI divisions to simplify reporting.
  2. Scan with Matterport Pro3: Long-range LiDAR captures large, bright spaces and exteriors accurately.
  3. Annotate with Mattertags: Tag RFIs, submittals, spec sections, and punch notes directly in the tour. Link to Procore, Autodesk Build, or shared docs.
  4. Deliver fast: Share a secure URL, embed on your project portal, and export assets.
  5. BIM-ready exports: Receive MatterPak (.xyz point cloud, .obj mesh) and optional .E57 for Revit/Navisworks coordination and clash checks.

Our Matterport 3D Tour photographers recommend keeping a simple naming convention for versions (e.g., “Tower-A_Level-12_Predrywall_2025-03-15”) so your team can instantly find the right snapshot.

Best Practices Our Matterport 3D Tour Photographers Recommend

  • Lock the path before scanning
    • Clear debris, move ladders, and coordinate with trades to keep corridors open.
    • Our Matterport 3D Tour photographers recommend scanning clockwise per floor to maintain predictable navigation.
  • Control lighting and contrast
    • Turn on temp lighting; avoid direct sun hotspots near curtain walls by scanning earlier in the morning.
  • Capture at consistent intervals
    • Weekly for critical phases; biweekly for steady progress. Time-stamped consistency is key for lender draws and owner updates.
  • Annotate with intention
    • Use Mattertags to label unit numbers, circuit IDs, valve locations, and inspection approvals. Limit to essential notes so the tour remains clean and fast.
  • Protect sensitive areas
    • Exclude server rooms, security closets, or restricted zones if needed. We can password-protect and segment tours.
  • Include exteriors strategically
    • Our Matterport 3D Tour photographers recommend periodic exterior walks to track façade, roofing, and sitework—especially when weather or access windows are tight.
  • Pair with 2D floor plans
    • Upload PDFs so viewers can jump by room. It reduces confusion on large footprints.

Use Cases Across Stakeholders

  • Owners and Developers
    • Transparent progress updates, fewer site trips, and a living archive for turnover. Useful for investor presentations and preleasing.
  • General Contractors
    • Visual evidence for pay applications, faster RFI resolution, reduced rework. Create a defensible record for change management.
  • Subcontractors
    • Confirm preconditions, verify layout, and coordinate sequences. Share exact route paths and penetrations with crews.
  • Lenders and Insurers
    • Clear percent-complete visibility and risk documentation without mobilizing inspectors for every check.

Our Matterport 3D Tour photographers recommend inviting key stakeholders to a monthly “virtual walk” using the latest tour—screen-share, annotate, assign tasks, and export a recap. It’s a 30-minute meeting that can save days.

BIM Integration and Technical Deliverables

For VDC teams, Invision Studio provides BIM-friendly files that plug into your coordination workflow:

  • MatterPak: Point cloud and mesh to align with Revit models for dimensional checks.
  • .E57 point clouds: Higher fidelity for large areas and clash analysis in Navisworks.
  • Measurement tools: Verify clearances, ADA compliance, and fixture spacing directly in the tour.

Our Matterport 3D Tour photographers recommend a pre-scan alignment meeting with your VDC lead to confirm control points, datum references, and file formats so integrations are seamless.

KPIs to Track: Turning Tours into ROI

  • RFI volume and response time: Expect fewer RFIs and faster closeouts with visual context.
  • Rework reduction: Catching issues pre-drywall significantly lowers change orders.
  • Approval cycle time: Lender draws and owner sign-offs move faster with visual proof.
  • Travel and labor savings: Fewer in-person walk-throughs for remote stakeholders.
  • Punch list velocity: Use tags to assign and verify fixes faster.

Add one line to weekly reports: “Linked Matterport tour: Level 07 pre-drywall (3/15).” Our Matterport 3D Tour photographers recommend noting three highlights and two risks inside the tour via tags to focus the team.

Implementation Checklist with Invision Studio

  1. Define milestones to capture (e.g., slab, rough-in, pre-drywall, punch).
  2. Map scan zones per floor/area; assign access and escort if needed.
  3. Book recurring sessions with Invision Studio (weekly/biweekly).
  4. Prep the site: clear path, power on lights, coordinate with trades.
  5. Receive tour + exports; embed in your project portal.
  6. Add Mattertags for RFIs, specs, and punch items.
  7. Review in standups; update next scan goals.
  8. Archive as-built tours at turnover for facilities.

Our Matterport 3D Tour photographers recommend starting with a pilot area (one building stack or two typical floors) to prove the workflow, then expanding portfolio-wide.

Why Construction Teams Choose Invision Studio

Invision Studio specializes in Matterport 3D Tours for active construction, with processes built for safety, speed, and accuracy:

  • Pro3 LiDAR expertise for large interiors, exteriors, and challenging light.
  • Construction-savvy operators who understand sequencing, safety, and documentation.
  • Fast turnaround with clean navigation, disciplined tagging, and BIM-ready exports.
  • Secure sharing options tailored to owners, lenders, and insurers.
  • Hands-on guidance: Our Matterport 3D Tour photographers recommend best practices specific to your project type—multifamily, mixed-use, student housing, hospitality, or healthcare.

Ready to See Progress More Clearly?

Matterport 3D Tours turn a complex jobsite into a clear, shared reality—helping you stay on schedule, reduce risk, and hand over a defensible as-built record. Partner with Invision Studio to set a scan cadence, annotate with purpose, and integrate with your BIM and reporting workflows.

Our Matterport 3D Tour photographers recommend scheduling your first capture at the next major milestone so you immediately start building a visual history. Contact Invision Studio to plan your construction progress documentation today.

Tags:

Author

Chris Lara - Owner, Creative Legacy Agency

I eat, breathe, and sleep marketing. It is my life and my passion. Manifesting dreams into reality for entrepreneurs is what I live for.

Connect with me on LinkedIn