Matterport cameras capture 360° imagery from a stationary position, so anything moving through the frame can appear blurred, duplicated, or ghosted in the final tour. People and pets can remain in the property, but they need to stay in rooms that aren’t currently being captured and move ahead of or behind the photographer. Vehicles in garages or driveways should be removed before the session begins.
Key Takeaways
- The camera sees in every direction at once. There is no “behind the camera” to hide in during a scan.
- People and pets can stay in the home — they just need to stay out of the room being scanned and move room-to-room ahead of the photographer.
- Movement during capture causes ghosting, duplication, or stretched artifacts that cannot be edited out later.
- Vehicles should be removed from garages and driveways before the scan if those areas are being captured.
- Pets are best secured in a crate, a car, a closed room scheduled for last, or off-site entirely.
- Occupied scans are completely normal — tenants, staff, and owners are present on most commercial and many residential shoots.
- Mistakes mean re-scanning that room, which adds time on site rather than cost after the fact.
- Invision Studio builds a room-by-room sequence before capture so occupied properties flow smoothly.
Table of Contents
- The Short Answer
- Why Movement Breaks a Matterport Scan
- What Ghosting Actually Looks Like
- Can People Stay in the Property?
- How Pets Should Be Handled
- Vehicles, Garages, and Driveways
- Scanning Occupied Commercial Spaces
- What About the Photographer?
- Privacy, Consent, and Occupied Properties
- A Practical Pre-Scan Checklist
- Frequently Asked Questions
The Short Answer {#short-answer}
A Matterport camera does not point in one direction. It rotates on its tripod and records the entire sphere around it — floor to ceiling, 360 degrees horizontally. Each scan position takes roughly 20 to 60 seconds to complete depending on the device.During those seconds, the room must be still.This is the part that surprises first-time clients. With traditional real estate photography, you simply step behind the photographer and you’re out of the shot.
With Matterport, there is no behind. If you are in the room, you are in the scan.That doesn’t mean the property must be empty. It means occupants need to be one room ahead or one room behind the camera at all times.
Our Matterport 3D Tour photographers recommend establishing that rhythm in the first five minutes on site — once everyone understands the pattern, occupied scans go smoothly and rarely add meaningful time.
Why Movement Breaks a Matterport Scan {#why-movement-breaks}
Two capture processes run simultaneously, and movement disrupts both:
Photographic capture. The camera builds each panorama from multiple exposures taken as it rotates. A person who moves between exposures appears twice, partially, or as a smear across the seam.
Depth capture. The camera also measures distance to every surface. A moving body registers as inconsistent geometry — a wall that exists in one reading and not the next. This can corrupt the mesh, affecting the dollhouse view, floor plan accuracy, and measurement tool.
The second issue is the more serious one. A ghosted person is cosmetically unfortunate. Corrupted depth data can cause alignment failures that force re-scanning a larger area than the single room where the problem occurred.
What Ghosting Actually Looks Like {#ghosting}
Clients often ask what the consequence really is. In practice, movement during capture produces:
| Artifact | Cause | Fixable after the fact? |
|---|---|---|
| Half a person at a panorama seam | Walked through mid-rotation | No — requires re-scan |
| The same person appearing twice | Moved and was captured in two positions | No — requires re-scan |
| Transparent or “ghosted” figure | Partially present across exposures | No — requires re-scan |
| Stretched or smeared geometry | Depth sensor read a moving object | No — requires re-scan |
| Floating debris in dollhouse view | Corrupted mesh data | Sometimes, by hiding the scan point |
| A pet blur across the floor | Animal crossed during rotation | No — requires re-scan |
The consistent answer in that right-hand column is why this matters. Matterport tours are built from real captured data, not renderings — there is no layer to delete. The fix is always to capture that position again.
Our Matterport 3D Tour photographers recommend flagging any movement the moment it happens rather than hoping it went unnoticed. Re-scanning a single position on the spot takes under a minute. Discovering the problem after processing means a return visit.
Can People Stay in the Property? {#people}
Yes. Occupied scans are routine.The workable approach is sequential room clearing:
- The photographer announces which room is next.
- Occupants move to a room already completed or not yet started.
- The room is scanned.
- Occupants may return.
- Repeat.
This works well in homes with tenants, offices with staff, and retail spaces during business hours. It requires only that someone communicates clearly as the session progresses.Practical notes for occupied residential scans:
- Designate a “staging room” — often a garage, basement, or bedroom scheduled last — where occupants and clutter can wait.
- Keep children supervised and together. Children are the most common source of unexpected movement.
- Avoid doorway loitering. Standing in a hallway adjacent to an open door still puts you in frame.
- Expect to move more than once. A typical home has eight to fifteen scan zones.
Our Matterport 3D Tour photographers recommend that one occupant act as the point of contact for the session rather than everyone coordinating independently — it reduces confusion considerably in busier properties.
How Pets Should Be Handled {#pets}
Pets deserve their own section because they are unpredictable in ways people aren’t.
Best options, in order of reliability:
- Off-site. A walk, daycare, or a neighbor’s house during the session.
- Crated in a room scanned last, with the crate removed or the room excluded.
- Secured in a vehicle (weather permitting, with appropriate safety precautions).
- In a closed room, rotated as the photographer progresses.
What doesn’t work: free-roaming pets, pets “that will stay put,” and pets following the photographer out of curiosity. Cats in particular are drawn to tripods, and dogs frequently shadow unfamiliar visitors from room to room.There is also a practical consideration beyond ghosting: pet beds, bowls, litter boxes, and toys appear in the final tour permanently.
For listing properties, our Matterport 3D Tour photographers recommend removing pet accessories alongside the pets themselves — it’s a small step that noticeably improves how a space presents.
Vehicles, Garages, and Driveways {#vehicles}
If the garage, driveway, or parking area is part of the capture, vehicles should be moved before the session begins.
Why:
- A vehicle occupies most of a garage’s visual volume, obscuring the space being marketed
- Vehicles create large depth-data blind spots behind them
- License plates introduce an unnecessary privacy element
- A parked car makes the garage read as smaller than it is
If the garage is being skipped entirely, vehicles can stay — but confirm this in advance rather than assuming.
For commercial properties, loading docks, parking structures, and service bays should be cleared or scheduled during low-activity windows. Our Matterport 3D Tour photographers recommend early-morning capture for commercial exteriors and parking areas, when vehicle traffic is at its lowest.
Moving vehicles outside windows are generally a non-issue for interior scans, though a car passing a large storefront window during capture can occasionally register.
Scanning Occupied Commercial Spaces {#commercial}
Offices, retail stores, restaurants, medical facilities, and warehouses are frequently scanned while operating. The same rules apply, with additional coordination:
- Notify staff in advance, including the date, approximate timing, and what’s being captured.
- Scan during off-peak hours where possible — before opening, after closing, or during a known lull.
- Coordinate with security for badge access, restricted areas, and camera policies.
- Identify exclusion zones upfront — server rooms, HR offices, patient areas, anything with visible confidential material.
- Clear desks of sensitive documents in areas being captured.
- Expect sectional scanning in large facilities, working floor by floor or wing by wing.
Our Matterport 3D Tour photographers recommend a brief walkthrough with a facilities or operations contact before the first scan position is set. Five minutes of planning typically prevents an hour of rework.
What About the Photographer? {#photographer}
A reasonable question: if the camera sees everything, where does the photographer go?They step out of the room, around a corner, or behind a door while the camera rotates. On tripod-based captures, the photographer triggers the scan remotely and relocates out of sight.
Occasionally a photographer is deliberately positioned in a scan’s blind spot directly beneath or behind the device.This is also why photographers sometimes ask occupants to step into a specific spot rather than simply “somewhere else” — they know where the camera’s blind zones are and you don’t.
Privacy, Consent, and Occupied Properties {#privacy}
Because Matterport captures everything visible, privacy warrants deliberate attention:
- Personal documents, mail, prescriptions, and photos should be put away before capture
- Computer and television screens should be powered off
- Whiteboards in offices should be erased or excluded
- Children’s rooms — consider removing name signage and personal photos
- Employees and tenants should be informed in advance that capture is occurring
- Scan positions can be hidden after processing, but the underlying data was still captured
Our Matterport 3D Tour photographers recommend a dedicated privacy pass through the property before scanning begins — separate from the tidying pass, and focused specifically on anything identifying.
A Practical Pre-Scan Checklist {#checklist}
24 hours before:
- Arrange pet care or containment
- Notify household members, tenants, or staff
- Plan vehicle relocation
- Identify any rooms to exclude
Morning of:
- Remove personal documents and photos
- Power down screens
- Move vehicles out of garage and driveway
- Clear countertops and floors
- Open blinds, turn on all lights
- Replace any burnt-out bulbs
- Remove pet bowls, beds, and litter boxes
- Designate a staging room for people and clutter
During the session:
- Stay one room ahead or behind the photographer
- Avoid doorways adjacent to active scanning
- Supervise children continuously
- Report any accidental movement immediately
Frequently Asked Questions {#faq}
Do I have to leave my house during a Matterport scan? No. You can remain in the property as long as you stay out of the room being actively scanned and move ahead of or behind the photographer.
What happens if someone walks through a scan? That scan position is re-captured, usually immediately. It costs a minute of time if caught right away.
Can people be removed from the tour afterward? No. Matterport tours are built from real photographic and depth data, not editable renderings. The scan position must be re-captured.
Can my dog stay in the backyard during the scan? Yes, if the backyard isn’t being captured. If exterior scanning is planned, the pet should be secured elsewhere during that portion.
Should I move my car out of the garage? Yes, if the garage is being scanned. A vehicle blocks most of the space and reduces how large the garage appears.
Can an office be scanned while employees are working? Yes, with coordination. Staff move out of active scan zones, and sensitive areas are excluded. Off-peak scheduling makes it easier.
Will my neighbors or passing cars show up? Only if visible through windows or during exterior capture. Interior scans are rarely affected.
How long do I need to stay out of each room? Typically under a minute per scan position, though larger rooms may require several positions.
Can certain rooms be excluded entirely? Yes. Rooms can be skipped during capture or scan positions hidden afterward — though skipping during capture is cleaner.
Working With Invision Studio
Occupied properties are the norm, not the exception. Homes with families, offices with staff, retail spaces mid-business-day — these are captured successfully every week. What makes the difference is sequencing: knowing the scan order in advance so occupants, pets, and vehicles move once rather than repeatedly.
Invision Studio plans a room-by-room capture sequence before arriving and shares it on site, so everyone knows where to be and when. Our Matterport 3D Tour photographers recommend discussing occupancy, pets, vehicle access, and any exclusion zones during booking — it’s the difference between a session that runs on schedule and one that stretches an extra hour.



