Choose Your Category

Complete the 3 Steps to Instantly see your quote.

Invision Studio Invision Studio

Commercial

Invision Studio Invision Studio
Invision Studio Invision Studio

Real Estate

Invision Studio Invision Studio

Choose Your Services

Select All Services that apply

Invision Studio 360 Tours Icon

360° Virtual Tours

Invision Studio Invision Studio

Edit

Invision Studio

X
Yes
No
Yes
No
Yes
No
Save
Invision Studio

Architectural Photos

Invision Studio Invision Studio

Edit

Invision Studio

X
Yes
No
Save
Invision Studio

Aerial Drone Photos

Invision Studio Invision Studio

Edit

Invision Studio

X
Yes
No
Save

Project Details

Fill in Required Fields to see your Quote.

From Invision Studio To Invision Studio

* Your information will remain private (See privacy policy for details)

Congratulations!

We've Emailed Your Quote and we'll be in touch.
We look forward to working with you on this exciting project!

Industry

Estimated Cost

Invision Studio Invision Studio
Invision Studio
Invision Studio

X
Yes
No
Yes
No
Yes
No
Invision Studio Invision Studio
Invision Studio
Invision Studio

X
Yes
No
Invision Studio Invision Studio
Invision Studio
Invision Studio

X
Yes
No
Next

X

A Matterport tour cannot be partially edited to reflect physical changes to a space. Because the tour is built from photographic depth data captured at a single moment, any change to furniture, finishes, or layout requires a new scan of the affected area.

However, you do not always have to re-scan the entire property — single rooms or floors can often be re-captured and published as an updated tour, and the original tour can be archived or replaced while keeping the same marketing workflow intact.

Key Takeaways

  • Matterport tours are not editable like a design file. The 3D model is derived from real captured data, so changes to the physical space require new capture.
  • Partial re-scans are possible. A single remodeled room, renovated floor, or re-staged area can be re-captured rather than scanning the whole property again.
  • Re-scanning is faster and cheaper than the original capture in most cases, because the photographer already knows the property layout and access requirements.
  • The tour link can change. Replacing a tour usually generates a new Space ID, which means MLS listings, websites, and emails may need the link updated — plan for this.
  • Non-physical edits are possible without re-scanning: tags, labels, highlight reels, branding, cover photos, and hidden scan points can all be adjusted anytime.
  • Virtual staging is not the same as re-scanning and has limits inside a 3D tour.
  • Invision Studio handles re-scan scheduling, link management, and deliverable updates as a single coordinated service.

Table of Contents

  1. The Short Answer
  2. Why a Matterport Tour Can’t Simply Be “Edited”
  3. What Can Be Changed Without Re-Scanning
  4. When You Should Re-Scan
  5. Full Re-Scan vs. Partial Re-Scan
  6. How a Partial Re-Scan Actually Works
  7. What Happens to the Original Tour and Its Link
  8. Cost and Turnaround for an Updated Tour
  9. Virtual Staging and Its Limits
  10. Planning Ahead to Minimize Re-Scans
  11. Frequently Asked Questions

The Short Answer {#short-answer}

Yes, a Matterport tour can be updated — but “updated” means re-captured, not retouched.This is the single most common misunderstanding clients bring to a conversation about Matterport. A 3D tour looks like a rendering, so people assume it behaves like one: swap the sofa, change the paint color, delete the clutter. It doesn’t work that way. Every surface you see in a Matterport tour is real photographic data stitched to real depth measurements taken by a camera standing in that room.When the room changes, the data is stale. The fix is new data.

The good news is that re-capture is routine, often partial, and usually quicker than the original session. Our Matterport 3D Tour photographers recommend treating a tour less like a permanent asset and more like a dated snapshot — one you refresh when the property meaningfully changes.

Why a Matterport Tour Can’t Simply Be “Edited” {#why-not-editable}

Three technical realities drive this:

1. The imagery is photographic, not modeled. There is no separate “furniture layer” to toggle off. The sofa is baked into the panoramic imagery and into the depth mesh.

2. Geometry and imagery are interdependent. The dollhouse view, floor plan view, and measurement tool all derive from the same scan data. Changing one element inconsistently would break the others.

3. Alignment is scan-position dependent. Scan points are stitched together based on overlapping geometry. You cannot drop a new room into an old model unless the surrounding geometry still matches.This is also why Matterport tours are trusted for documentation purposes — insurance, construction progress, facility records. The inability to casually edit them is a feature, not a flaw.

What Can Be Changed Without Re-Scanning {#what-can-change}

Plenty of the tour experience is adjustable at any time, because it lives in the software layer rather than the captured data:

ChangeRequires re-scan?
Add or edit Mattertags / notesNo
Change room labelsNo
Update highlight reel orderNo
Change cover imageNo
Add branding, logo, contact infoNo
Hide or disable specific scan pointsNo
Adjust tour start positionNo
Enable/disable measurement toolNo
Trim exterior or unwanted scan areasNo
Change furniture in the spaceYes
New flooring, paint, or finishesYes
Walls moved, added, or removedYes
New addition or converted spaceYes
Staging added or removedYes

Our Matterport 3D Tour photographers recommend exhausting the software-layer options first. A surprising number of “we need a new tour” requests are actually solved by re-ordering the highlight reel, updating tags, or hiding an unflattering scan position.

When You Should Re-Scan {#when-to-rescan}

Re-capture is warranted when the space no longer matches what a viewer would encounter in person. Common triggers:

  • Staging added or removed. Vacant-to-staged is the most frequent reason in residential real estate.
  • Completed renovation. New kitchen, new bath, refinished floors, removed wall.
  • Change of tenant or use. Commercial spaces turning over between tenants.
  • Seasonal or merchandising changes. Retail and hospitality spaces that reset displays.
  • Construction progress documentation. Deliberate sequential scans at defined milestones.
  • Damage and restoration. Pre-loss and post-repair documentation for insurance.
  • Listing relaunch. A property returning to market after time off should not show a year-old interior.

A practical test: if a buyer, tenant, or adjuster walking the property would notice a meaningful discrepancy from the tour, re-scan.

Full Re-Scan vs. Partial Re-Scan {#full-vs-partial}

Partial re-scan makes sense when changes are contained — one remodeled bathroom, a single refreshed floor, one re-staged living area, and the rest of the property is unchanged.

Full re-scan makes sense when:

  • Changes span most of the property
  • Walls moved, altering the overall footprint
  • Flooring changed throughout (it appears in nearly every scan position)
  • The original scan was low density or technically poor
  • The floor plan deliverable also needs to be regenerated
  • Enough time has passed that lighting, landscaping, and general condition have shifted

Our Matterport 3D Tour photographers recommend being honest about scope during the booking call. A partial re-scan that turns out to need full coverage mid-session is more disruptive than scheduling correctly from the start.

How a Partial Re-Scan Actually Works {#how-partial-works}

In practice, the photographer returns and re-captures the changed area plus a buffer of adjacent, unchanged scan positions. That buffer matters — it gives the alignment engine overlapping geometry to anchor the new data against the old.Stages:

  1. Review the existing tour to identify affected scan positions.
  2. Re-capture the changed area at full density.
  3. Re-capture transition points — doorways, hallways, and adjacent rooms.
  4. Re-process and align the combined dataset.
  5. Quality review to confirm no seams, duplicated geometry, or orphaned scan points.
  6. Republish and update deliverables.

A caution worth stating plainly: partial re-scans are more technically fragile than full re-scans. If the surrounding geometry changed more than expected, alignment can fail and a full re-scan becomes necessary anyway.

Our Matterport 3D Tour photographers recommend budgeting for that possibility on properties with structural changes.

What Happens to the Original Tour and Its Link {#link-management}

This is the operational detail most people overlook.Depending on how the update is handled, the updated tour may be published under a new Space ID, which means a new URL. Anywhere the old link was placed will need updating:

  • MLS listing
  • Property website or landing page
  • Email campaigns already sent (these cannot be recalled)
  • Brochures and QR codes
  • Social posts
  • Third-party syndication portals
  • Internal asset management systems

Two mitigations help significantly:

Use a redirect or branded short link. If the tour was originally distributed through a redirect you control, you simply repoint it — no downstream edits needed.

Keep QR codes pointed at a redirect, not the raw Matterport URL. Printed materials cannot be updated; redirects can.Invision Studio flags link dependencies before republishing so clients know exactly what needs changing and where.

Cost and Turnaround for an Updated Tour {#cost-turnaround}

Re-scan pricing generally depends on:

  • Square footage being re-captured
  • Partial vs. full coverage
  • Travel and access requirements
  • Whether floor plans or photography also need regenerating
  • Scheduling urgency

Partial re-scans typically cost meaningfully less than the original capture. Full re-scans are priced similarly to a new capture, though repeat properties often move faster on site because access, parking, and layout are already known.Turnaround for processing and publishing is usually comparable to the original tour — often 24 to 48 hours after capture for the 3D tour, with floor plan regeneration adding time if ordered.

Virtual Staging and Its Limits {#virtual-staging}

Virtual staging inside a Matterport tour is possible but constrained. Because the tour is viewable from many angles and includes depth data, added furniture must hold up from multiple vantage points — unlike a single flat listing photo where virtual staging is straightforward.Limitations to understand:

  • It works best in vacant spaces, not for replacing existing furniture
  • Measurement and dollhouse views may not reflect staged items
  • Disclosure requirements apply in many real estate jurisdictions
  • Cost per room can approach the cost of a re-scan

Our Matterport 3D Tour photographers recommend virtual staging primarily for vacant properties where physical staging isn’t feasible — and physical re-scan after real staging whenever the budget allows, because the result is simply more credible.

Planning Ahead to Minimize Re-Scans {#planning-ahead}

A few habits reduce how often re-capture is needed:

  • Scan after staging, not before, for listings.
  • Scan after punch-list completion, not during final touches.
  • Distribute via a redirect link you control from day one.
  • Decide on floor plans upfront so capture density supports them.
  • For construction documentation, set milestone dates in advance and book the series as a package.
  • Declutter before capture — it’s the cheapest improvement available.

Frequently Asked Questions {#faq}

Can I just delete the old furniture from my Matterport tour? No. Furniture is part of the captured photographic and depth data. Removing it requires re-scanning the space after the furniture is gone.

Can one room be re-scanned instead of the whole house? Often yes, provided the surrounding areas are unchanged and sufficient overlapping scan positions are re-captured for alignment.

Will my tour link stay the same after an update? Not necessarily. Republishing frequently produces a new URL. Using a branded redirect link from the start avoids the problem entirely.

How long does a re-scan take on site? A single-room partial re-scan may take under an hour. A full residential re-scan typically runs 1–3 hours depending on size.

Is a re-scan cheaper than the original tour? Partial re-scans usually are. Full re-scans are priced similarly to a new capture.

Do I need new floor plans after a remodel? If walls moved or square footage changed, yes. If only furniture or finishes changed, the existing floor plan likely remains accurate.

Can the old tour be kept for records? Yes. Prior tours can be archived rather than deleted — useful for insurance, construction documentation, and before/after comparisons.

What about exterior changes like new landscaping? If the exterior was captured, it requires re-scanning. Interior-only tours are unaffected.


Working With Invision Studio

Updating a Matterport tour is less about the camera and more about sequencing — scanning at the right moment, re-capturing the right scope, and managing links so nothing breaks downstream.Invision Studio coordinates re-scans, partial captures, floor plan regeneration, and link updates as one process rather than a series of disconnected requests.

Our Matterport 3D Tour photographers recommend reaching out before a remodel wraps or staging is installed, so capture can be scheduled for the moment the space is ready rather than weeks after.

Tags:

Author

Chris Lara - Owner, Creative Legacy Agency

I eat, breathe, and sleep marketing. It is my life and my passion. Manifesting dreams into reality for entrepreneurs is what I live for.

Connect with me on LinkedIn